DR-10C

了解产品功能

规格内容

* DR-10CH，AK-DR10CH和AK-DR10CR已停产。当前仅提供3.5mm插孔的DR-10CS。

录音介质	microSD 卡(64MB - 2GB), microSDHC 卡(4GB - 32GB)
录音文件格式	48 kHz, 24bit, 单声道, WAV(BWF 格式)
通道数	1ch, 单声道
模拟音频输入规格
端子	More info for Pin Assign, please click here
DR-10CS	3.5mm(1/8") TRS迷你插口带锁, 森海塞尔)
DR-10CH	迷你XLR 4-pin公头 (舒尔)
AK-DR10CR	HIROSE KMC-9BRF-4S (索尼/RAMSA, 可选面板)
最小输入电平	-53dBu (根据型号选择)
最大输入电平	-12dBu (根据型号选择)
输入阻抗	33kΩ
Mic 增益	+10dB到+35dB (根据模型选择)
PHONES
端子	3.5mm(1/8")立体声迷你插口 (双单声道输出)
USB
端子	Micro B型号
格式	USB2.0 HIGH SPEED (480Mbps)
电源
主要	1颗七号电池 (碱性电池、镍氢电池、锂电池), 电脑USB总线供电
内置时钟	锂充电电池 (综合)
功率消耗	0.45W
电池使用时	WAV,24位/48kHz录制,不使用耳机,限幅器:关闭, 双重录制:关闭, JEITA录制
使用碱性干电池时 (EVOLTA)	约10.0小时
使用镍氢电池 (eneloop)	约8.0小时
使用锂电池 (劲量ULTIMATE LITHIUM)	约15.5小时
机身尺寸
DR-10CS / DR-10CH	52(W) × 55.6(H) × 24.4(D) mm
AK-DR10CR	49.2(W) × 20.9(H) × 21.5(D) mm
重量
DR-10CS / DR-10CH	63g (带电池), 51g (不带电池)
AK-DR10CR	16g
操作温度	0 – 40˚C
零配件
DR-10CS / DR-10CH	发射机的连接线, USB线(A型-micro B型) ,皮带夹, 连接用硅胶带, 存放本机和配件定制的保护包, 用户手册（带保修卡）
AK-DR10CR	发射机的连接线, 固定螺钉

频率响应	20Hz to 22kHz +1/-2dB (IN to PHONES)

DR-10CS

SENNHEISER Compatibility

Tip :	Mic (Bias)	When use the DR-10C with a mic, select "MIC BIAS" under Menu, and switch to "ON" for the mic bias supply from the unit itself.
Ring :	Line	IN-OUT Connection. (Not available for DR-10C)
Sleeve :	GND

DR-10CH / AK-DR10CH

SHURE Compatibility

1 :	Ground
2 :	+5VDC Bias	When use the DR-10C with a mic, select "MIC BIAS" under Menu, and switch to "ON" for the mic bias supply from the unit itself.
3 :	Audio
4 :	Active Load	Two-way IN-OUT connection. Internal Audio is available in the DR-10C.

AK-DR10CR

* Please utilize the slide switch for SONY / RAMSA selection.

SONY Compatibility

1 :	+5V	When use the DR-10C with a mic, select "MIC BIAS" under Menu, and switch to "ON" for the mic bias supply from the unit itself.
2 :	HOT	Two-way IN-OUT connection. Not available in the DR-10C.
3 :	COLD
4 :	GND

RAMSA Compatibility

1 :	HOT
2 :	HOT	Two-way IN-OUT connection. it does not support 2pin on a mic.
3 :	+3.5V	When use the DR-10C with a mic, select "MIC BIAS" under Menu, and switch to "ON" for the mic bias supply from the unit itself.
4 :	GND

Last update : January 22, 2018

DR-10CS
SENNHEISER
Transmitter	SK 100, SK 300, AVX, SK D1
Lavalier Microphone	ME 2, ME 2-US, ME 2-II, ME 4, MKE 1-ew, MKE 2-ew
RODE
Transmitter	RODELink Filmmaker Kit
Lavalier Microphone	RODELink Filmmaker Kit
SONY
Transmitter	UTX-B03
Lavalier Microphone	ECM-V1BMP (included in the UMP-D11 bundle) NOTE: Please make sure to use the ECM-V1BMP microphone in combination with the UTX-B03 transmitter. The DR-10C and the ECM-V1BMP microphone have a different pin assignment, thefore the DR-10C does not supply mic bias. Turn OFF the DR-10C "MIC BIAS" and proceed to use the mic bias supply from the UTX-B03 unit. Different pin assignments won't cause damage to the equipment in use.